UGP-8 /12 Twin Capstan Cable Puller.

(With Optional hydraulic motor displacements and planetary gear box ratios this puller can be converted to

12,000 lb. pulling capacity)

This all hydraulic powered puller features twin planetary gear box drives, 12" diameter multi-grooved pulling wheels and 2 speed

motors The flexible design enables optional large capacity storage drums to be installed for increased pulling distances.

The hydraulic powered leveling system works with various types wire and synthetic ropes and is not affected by damage or distorted

wire rope.TheDemand payout feature enables high speed payout with a light force is to the pulling line. Payout stops automatically

when this force is removed. Adjustable line pull limiting of the load sensing hydraulics prevents damage to conductors or ducts if a jam

should occur. The hydraulic system enables this machine to work as a "constant tension winch", with the operator able to make incremental

pressure adjustments on difficult pulls.

A simple wheel counter measuring device measures feet of line paid out or cable pulled in.

The UGP pullers are available as a skid for installation on an existing trailers or truck chassis*, or can be installed on factory built trailers

either a single axle or a tandem trailer with room for compressors up to300 CFM, The Swivel Base Model pivots and elevates to quickly line up with ducts in vaults.

Performance Specs.

Pulling Speed/ Line Pull: UGP-8 / 0-100 FPM -0-8000 LB.UGP-12 / 0-60 FPM -0-12,000 LB.

Payout Speed: UGP-8 200 FPM UGP-12 - 160 FPM

Standard drum storage capacities: 3500 ft. 3/8" wire rope or 3000 ft. 5/8" synthetic (Optional large capacity storage drums for up to 5000 ft.available)

Pulling Capstans: 12" diameter x 5 groove steel wheels.

Capstan Drives: Two heavy duty planetary gear boxes rated at 60,000 lb/in torque each.

Cable Leveling: Hydraulic powered with automatic reversing for positve full time leveling control. Adjustable traverse speed for rope or cable changes.

Engine: 33 HP water cooled Izuzu diesel. (Optional 37 HP Hatz air cooled diesel) Also available with Hatz Silent Pack Engine for 72 Dba rating.

Hydraulics: Bosch Rexroth load sense variable pressure compensated hydraulic pumps and valving.

Dimensions: Skid Only: L: 6' 6" W: 48" H: 98" top of mast.

Single Axle Trailer: Single 7000 LB Torflex axle with electric brakes.

Tool Boxes: Two 12 x 14 x 24

Tandem Axle Trailer: 16,000 GVW rated trailer with Tandem 7000 LB Torflex axles with electric brakes.

Stabilizers: Three 12,000 lb capacity with spring retract drop foot.

Optional over fender storage boxes 12 x 16 x 72 and front A frame box.

Optional hydraulic stabilizers:

Optional turntables for 30 degree coverage at rear or 270 degree rotation* for side operation.

*Requires proper chassis weight rating for off side operation.

More Pictures