BWT-39-3RC Bullwheel Tensioner / 3 Reel carrier

Equipment Specifications.(Tensioning Sytem Components)

Bullwheels: 39" diameter measured at bottom of groove. Linings: segmented EPDM rubber 3 grooves x 1.5" wide

Bullwheels configuration: Open reeved- 1/2 groove right hand offset.

Bullwheel tensioning Brake: 20" diameter with 4:1 chain reduction.

Fairlead rollers: 12" Deep V nylon with housed type roller bearings re-lube type.

Safety Hold Down Rollers: (2) 6" nylon 3 groove with spring tension control.

Reel Spindle Tensioning Brakes: 16" diameter ventilated aluminum bronze with hand wheel operated calipers-self leveling type.

Reel Spindles: 2 1/2" diameter C1045 shaft with adjustable drive pins-centering bushings-2 bolt split clamp.

Reel Spindle Bearings: Lifetime lubricated GSM nylon insert bearings.

Equipment Specifications.(Trailer Components)

Trailer Frame: Fully welded 1/4" wall tubular steel.

Fenders: 12 ga. tread plate.

Trailer Lighting: Sealed beam type with junction box.

Stabilizers: (3) 10,000 lb. crank type with spring retract drop foot.

Hitch: Bolt on 3" pintle eye with 3 positions. Safety Chains: Alloy with safety latch hooks.

Trailer Suspension: Leaf springs with rubber bushings and equalizers.

Standard Duty 21,000 GVW - 16,000 lb payload: Tandem 9K axles-electric brakes - 215-75R-17H tire-8 bolt disc wheel.

Heavy Duty 23,500 GVW - 18,000 lb payload: Tandem 10K axles-electric or ABS air brakes - 215-75R-17H-G tire-8 bolt disc wheel.

Extra Heavy Duty 29,200 GVW - 23,000 lb payload: Tandem 12K axles ABS air brakes - 11:00 x 22.5 tire-8 bolt disc wheel.

 

Back